Impressive Wiring A Safety Switch

Attach the ground wire according to your disconnect switch s instructions for safety.

Wiring a safety switch. Safety switches may consist of a switch only or. The green screw on the 2 way switch is for the ground so all ground wires should be connected as seen below. Safety switches are generally used for two purposes.

As a disconnecting means for a service entrance. It could be a short circuit a faulty appliance or even an exposed wire. To connect the switches simply score the wire with your wire stripper and push the insulation to expose about 3 4 in.

Installed correctly a safety switch minimises the risk of electrical fires electric shock and even lethal electrocution. Here s a wiring method that eliminates extra connections and creates a neater installation. 2 methods are explained with associated wiring diagrams.

This may require using additional electrical wire depending on your switch. Thanks for taking the time to watch our videos. A safety switch is a common type of enclosed switch.

It shows the elements of the circuit as simplified shapes and the power and also signal links in between the tools. All ground wires bare copper are all now connected incoming ground load ground and switch ground. The neutral wire may or may not be cut depending on the switch style.

If the wire must be lengthened be sure to use wire that is at least the same size or larger than the original. It is very important to connect the ground wire to the switch as well. A safety switch can kill the power in as little as 300 milliseconds once it detects that something has gone wrong.