Out Of This World Convert A Light Switch To An Outlet

Once you identify it be sure to turn off.

Convert a light switch to an outlet. The one that gives a positive reading is the line. The first thing you need to do is distinguish the line cable coming from the panel from the load cable which is the one going to the light fixture. Be sure none of the exposed wire is showing under the cap because if it is you could contact it with your tools or it could touch another wire.

If power is coming into the switch box from the panel and you want to connect an outlet to the switch your first option is to wire the receptacle to always be on. You can also wire it up so that the switch controls the outlet and the light it s connected to which may be useful if you have a lamp plugged into the outlet. The wire feeding the actual fixture must not be white and must not be a white that has been re marked as hot.

Things do get more complicated though. A white wire may be used to feed the hot connection to the switch but not to the actual fixture connection. The later situation would be very handy in your circumstance.

So if you need an extra electric outlet and have a rarely used a light fixture that has a bulb socket you can replace it quickly and easily with no special tools. The second way to do this will require a little more preparation. Sometimes power is at the light fixture with only two conductors being fed to the switch box.

Other times you ll see power enter the switchbox then continue to the light. Make sure to read the following information because converting a light switch into an outlet requires specific electrical wiring which is best verified using a voltage tester. Convert a light switch to an outlet remove the black wires from the switch screw a wire cap on the dead one and push it back into the box out of the way.

If you ve got electrical wiring you can wire almost any electrical device to it light fixture electric outlet or switch. To do this you simply purchase a screw in adapter that will screw into your light socket like a light bulb but it will have a plug or two on the end of it. How to properly add wire up a north american grounded electrical outlet receptacle from a wall light switch single pole 3 way.